What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 01:11

What does a fuse do?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Brain’s Reward Center Tracks Not Just What, But When Rewards Arrive - Neuroscience News
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Miley declines to address accusations in court documents about death of Tyler Skaggs - AP News
It also is a device that limits the change in current flow.
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
Upvotes:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
US Inflation to Tick Higher as Tariffs Reach Consumers - Bloomberg
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
But… the neutral is now “floating” because of the 1 ohm resistance.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A circuit breaker is similar, but is resettable.
Where can I find BPO projects?
There are two important concepts here.
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
Ethane Exporter Says U.S. Won’t Allow Shipments to China - WSJ
First Sentence:
a photo is worth a thousand words.
nine
One
An AC voltage/ current source, and an ac inductive load.
but this device (an Inductor) … impedes the rapid changes in the current.
Dodgers To Designate Chuckie Robinson For Assignment - MLB Trade Rumors
At one ohm, the resistor has a maximum of 1 watt power.
There are three different concepts here that are getting confused.
Now when you have a certain ac resistance, then a current flows in a loop.
Is there a correlation between sweating during sleep and high body temperature and sugar levels?
I post the exact comment here.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Teens like me, what are your expectations when entering adulthood?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–10[John johnson John Johnson ]
But it can get overloaded, and no longer works.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Barnstars:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It seems Mohan does not understand the difference between a comment and an Answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The bolt then partially travels down the line to your home.
In schematic diagrams this is the symbol for a fuse:
He then asserts :
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
For this case there are devices called Metal oxide varistors (MOV).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
[old diagram got deleted by accident]
One is “what exactly is in a ‘surge protector’ ? ”
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Here is a simplified AC power diagram.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
eight
So, the voltage could go up to 500 volts, and the fuse will not open up.
Because the load is inductive, the current lags the voltage.(by a bit).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This one hit behind the barn.
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
At least they know the answer if they wanted it.
This is where the MOV conducts again, and dissipated the energy.
what exactly is a ‘surge’ protector?
The other is “what does a “fuse” do?”
What is lightning?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
These devices are installed between the “hot” and “neutral” and protective ground.
[image of Common-mode choke]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The third is lightning and “how it gets conducted into a home.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
These are simplified answers to the original question, and does not change anything I wrote above.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This device then solves the entire problem.